unisonic technologies co., ltd 5n40k-mt power mosfet www.unisonic.com.tw 1 of 7 copyright ? 2014 unisonic technologies co., ltd qw-r205-050.a 5a, 400v n-channel power mosfet ? description the utc 5n40k-mt is an n-channel mode power mosfet using utc? s advanced technology to provide customers with planar stripe and dmos technology. this technology specializes in allowing a minimum on-state resistance and superior switching performance. it also can withstand high energy pulse in the avalanche and commutation mode. the utc 5n40k-mt is universally applied in electronic lamp ballast based on half bridge topology and high efficient switched mode power supply. ? features * r ds(on) <1.2 ? @ v gs =10v, i d =2.5a * high switching speed * 100% avalanche tested ? symbol
5n40k-mt power mosfet unisonic technologies co., ltd 2 of 7 www.unisonic.com.tw qw-r205-050.a ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 5n40kl-ta3-t 5N40KG-TA3-T to-220 g d s tube 5n40kl-tf3-t 5n40kg-tf3-t to-220f g d s tube 5n40kl-tf1-t 5n40kg-tf1-t to-220f1 g d s tube 5n40kl-tf2-t 5n40kg-tf2-t to-220f2 g d s tube 5n40kl-tf3-t 5n40kg-tf3-t to-220f3 g d s tube 5n40kl-tm3-t 5n40kg-tm3-t to-251 g d s tube 5n40kl-tms-t 5n40kg-tms-t to-251s g d s tube 5n40kl-tms2-t 5n40kg-tms2-t to-251s2 g d s tube 5n40kl-tms4-t 5n40kg-tms4-t to-251s4 g d s tube 5n40kl-tn3-r 5n40kg-tn3-r to-252 g d s tape reel 5n40kl-tnd-r 5n40kg-tnd-r to-252d g d s tape reel note: pin assignment: g: gate d: drain s: source ? marking
5n40k-mt power mosfet unisonic technologies co., ltd 3 of 7 www.unisonic.com.tw qw-r205-050.a ? absolute maximum ratings (t c =25c, unless otherwise specified) parameter symbol ratings unit drain-source voltage v dss 400 v gate-source voltage v gss 30 v drain current continuous (t c =25c) i d 5 a pulsed (note 2) i dm 20 a avalanche energy single pulsed (note 3) e as 210 mj peak diode recovery dv/dt (note 4) dv/dt 4.5 v/ns power dissipation to-220 p d 69 w to-220f/to-220f1 to-220f3 38 w to-220f2 39 w to-251/to-251s to-251s2/to-251s4 to-252/to-252d 58 w junction temperature t j +150 c storage temperature t stg -55~+150 c notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. repetitive rating: pulse width limit ed by maximum junction temperature 3. l = 16.8mh, i as = 5a, v dd = 50v, r g = 25 ? , starting t j = 25c 4. i sd 5a, di/dt 200a/s, v dd bv dss , starting t j = 25c ? thermal data parameter symbol ratings unit junction to ambient to-220/to-220f to-220f1/to-220f2 to-220f3 ja 62.5 c/w to-251/to-251s to-251s2/to-251s4 to-252/to-252d 110 c/w junction to case to-220 jc 1.8 c/w to-220f/to-220f1 to-220f3 3.25 c/w to-220f2 3.15 c/w to-251/to-251s to-251s2/to-251s4 to-252/to-252d 2.13 c/w
5n40k-mt power mosfet unisonic technologies co., ltd 4 of 7 www.unisonic.com.tw qw-r205-050.a ? electrical characteristics (t c =25c, unless otherwise noted) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss i d =250a, v gs =0v 400 v breakdown voltage temperature coefficient bv dss /t j reference to 25c, i d =250a 0.4 v/c drain-source leakage current i dss v ds =400v, v gs =0v 1 a gate- source leakage current forward i gss v gs =+30v, v ds =0v +100 na reverse v gs =-30v, v ds =0v -100 na on characteristics gate threshold voltage v gs ( th ) v ds =v gs , i d =250a 2.0 4.0 v static drain-source on-state resistance r ds ( on ) v gs =10v, i d =2.5a 0.65 1.2 ? dynamic parameters input capacitance c iss v gs =0v, v ds =25v, f=1.0mhz 710 910 pf output capacitance c oss 88 118 pf reverse transfer capacitance c rss 65 75 pf switching parameters turn-on delay time t d ( on ) v dd = 30v, i d = 0.5a, r g = 25 ? (note 1, 2) 48 60 ns rise time t r 54 100 ns turn-off delay time t d ( off ) 135 110 ns fall-time t f 48 105 ns total gate charge q g v ds = 50v, i d = 1.3a, v gs = 10 v (note 1, 2) 22 26 nc gate to source charge q gs 8 nc gate to drain charge q gd 6 nc source- drain diode ratings and characteristics maximum body-diode continuous current i s 5 a maximum body-diode pulsed current i sm 20 a drain-source diode forward voltage v sd i s =5a, v gs =0v 1.4 v notes: 1. pulse test: pulse width 300s, duty cycle 2% 2. essentially independent of operating temperature
5n40k-mt power mosfet unisonic technologies co., ltd 5 of 7 www.unisonic.com.tw qw-r205-050.a ? test circuits and waveforms same type as d.u.t. l v dd driver v gs r g - v ds d.u.t. + * dv/dt controlled by r g * i sd controlled by pulse period * d.u.t.-device under test - + peak diode recovery dv/dt test circuit p. w. period d= v gs (driver) i sd (d.u.t.) i fm , body diode forward current di/dt i rm body diode reverse current body diode recovery dv/dt body diode forward voltage drop v dd 10v v ds (d.u.t.) v gs = p.w. period peak diode recovery dv/dt waveforms
5n40k-mt power mosfet unisonic technologies co., ltd 6 of 7 www.unisonic.com.tw qw-r205-050.a ? test circuits and waveforms (cont.) v ds 90% 10% v gs t d(on) t r t d(off) t f switching test circuit switching waveforms 10v charge q gs q gd q g v gs gate charge test circuit gate charge waveform v dd t p time bv dss i as i d(t) v ds(t) unclamped inductive switching test circuit unclamped inductive switching waveforms
5n40k-mt power mosfet unisonic technologies co., ltd 7 of 7 www.unisonic.com.tw qw-r205-050.a ? typical characteristics drain current, i d (a) drain current, i d (a) drain current, i d (a) body-diode continuous current, i s (a) utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior writ ten consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
